Відео

Getting ready to do some work on my F150 with ForScan and was happy to see you had a video using it as well. Seems doable once you understand how it works!

That is so awesome your Wife and Daughter helping you.

Hey moostang. Just wanted to say miss your videos , I have a 19 F250, and understand life gets busier as kids get older and family grows - just wanted to let you know you have an awesome demeanor and videos were all great and so informative. Thanks for putting them out and hope alls well with the family and job and future. Thank you for all the educational and fun videos. Best of luck and will always look out for future vids. Take care

This will be my second intercooler pipe. The first was under warranty, now this one is on me. I went with S&B. Both stock ones failed in the same place.

Just what I was looking for😊😊😊😊😊😊

Bad ass car broo, I'm building one, do you have a parts list of what's all done, thanks

You would think they could make an adapter for the stock plug....what a pain in the ass👎 (Yeah I'm cussing rn)

What i want to see that no one in any vid has shown is how to remove the hose line to the intake

I'm considering these Trail editions vs the Step editions. Do you think the Trails have enough width to be used as a step?

How is this possible on 600+ hp My e85 FBO with shit tires runs faster than that with a stock mt82 I’m genuinely confused

Tailgate theft is on the raise again so these are now ~$30 - for a hose clamp and a piece of plastic. 😠

I have a problem with the pedal. maybe you know how to solve or what can be done. the official service said that they no longer produce these parts

I followed these instructions and read the PDF religiously. I installed it just like this on my 07 GT, but the red LED stays on after I turn on the car, and the 2 step stays on even without the clutch being pushed in. Did I install it wrong? Or do I have a defective unit?

I guess it’s different for everyone. But I had to drain about 5 gallons.

Very positive vibes video, and of course valuable. Kudos to both of you and best of wishes.

Will this part fits 2018 ford f150?

What about 2016 F250 diesel??

Hi, I like your content. Do you accept sponsored products?

why should fiddle with fittings/hoses of aftermarket catch can when you can easily get an oem ford performance for same price?

your suspension should take 60' to settle in; car looks too loose on rear

Great vid bro

Link??

Price?

What is the part number of the 2 wheel valence that replaces the 4 wheel valence on a 2019 ford f-250 super duty?

Any issues with leaks or anything positive to report?

Hi are you going to add the hot side from s&b

Regarding the buttons and the black cable. What type of connector did you use on the back of the buttons? Its a piece of black that then turns into the cable. It looks strong and am kind of looking for something like that. Anyone who can help out?

Mf said insane-o

were did you get the steering wheel for 150 bucks?

At end of video you plugged in a small plug with a wire looped back into itself. Then vehicle started. Did it come with kit or did you buy it seperate? If seperate where purchased and how much? Thanks, marvin

looks grood 💯😂

Stupidest design EVER on the part of Ford. I've got a 2019 F-350 DRW, and I'll be DAMNED if the thing is designed as it clearly is for you. Got my hand behind the seat, but I swear it doesn't feel like that. I'm ready to stick a GOD-SIZED prybar somewhere.

Just installed mine, thanks to you showing exactly where the latch release was. The builtrite video was not as helpful. Thanks

You don’t need to do any of this to change the bulbs on these trucks 😂 This is some of the worse advice ever to replace the headlight bulb and it will take hours to do it this way. Drivers side: Remove the fender liner bolts and push pin and fold the liner back onto the wheel. Make sure the wheels are turned to the driver side. Crawl under the truck and remove the old bulbs and install the new. Re-install the fender liner. Passengers side: remove the push pin for the air box scoop and unhook the wiring from the air tube and pull the filter box cover and remove the air filter then push the air box cover up and out of the way. Carefully pull up on the air filter box and remove it. Now you have access to both upper and lower bulbs. Remove and replace bulbs and reinstall the filter box the same way you pulled it apart. Takes at most 45 minutes to do both sides VS the way these guys did it risking breaking clips or breaking the grill and all the hassle they went through for absolutely no reason at all.

You don’t need to do any of this to change the bulbs on these trucks 😂 This is some of the worse advice ever to replace the headlight bulb and it will take hours to do it this way. Drivers side: Remove the fender liner bolts and push pin and fold the liner back onto the wheel. Make sure the wheels are turned to the driver side. Crawl under the truck and remove the old bulbs and install the new. Re-install the fender liner. Passengers side: remove the push pin for the air box scoop and unhook the wiring from the air tube and pull the filter box cover and remove the air filter then push the air box cover up and out of the way. Carefully pull up on the air filter box and remove it. Now you have access to both upper and lower bulbs. Remove and replace bulbs and reinstall the filter box the same way you pulled it apart. Takes at most 45 minutes to do both sides VS the way these yahoos did it risking breaking clips or breaking the grill and all the hassle they went through for absolutely no reason at all.

What ya mean “boys” us girls have Country Cadillacs too. 🥰

Dios mio debi ver esto antes de comprar mi st

I bought a knn and the bolt pattern on the heat shield to the body didnt match, the screws where to small to screw in, the nipple to connect the small rubber hose was way to long, so i yank that p.o.s. out and installed a s&b and love it, wont go back to knn.

Literally dodgy show how to do it🤦🏻‍♂️

Wheres the link for the f*king write up then??

Ford is so annoying with their issues that an over 100 year old vehicle manufacturing company shouldn't be having. Sad! Selling my f350 for nothing at all.

So how did ford fix it?

Never thought the lights on any vehicle I have had were insufficient.

Muchas felicidades quedó genial!!

Hey there, I'm a huge fan, I was just wondering if you could please share the part number for the harness you used in the you f250 please

I would get them but it's not enough light to the rear when driving. I've seen them on the road and you can barely see the rear of the truck! Not a fan at all.

My 2019 has 75 k on it and the hood shocks went out today!

Thanks for the video man helped me out so much

Bro thanks for the video! I have a 2017 F250 XLT that I am upgrading like you did. Im ordering the leather wrapped steering wheel like yours. My question is, will the oem airbag from my current XLT rubber steering wheel for sure be compatible with the new leather wrapped steering wheel?

Great video , betting lighting would have been awesome !